At a glance
Oven and furnace flues, in short.
- What it is
- The flue from an industrial oven or furnace to its terminal on the roof, with the adaptor, supports and roof details.
- Real jobs
- Oven flue installs, alterations and extensions, and a furnace exhaust survey, on factory sites in Derby.
- Working factories
- Installs planned in phases. Nights and weekends by arrangement.
- Who it is for
- M&E contractors, main contractors, consultants and factory engineering teams.
- Paperwork
- CAD drawings, job-specific RAMS and a certificate of conformity.
- Price
- Normally within 24 hours of drawings or survey information.
- 24 hours to a price, from drawings or survey information
- 7 days to a survey, normally within a week of order
- 60 minutes to calculations and CAD drawings after survey
- Same day job-specific RAMS, normally
- 2 to 4 weeks from order to install, faster when it is urgent
Normal turnarounds. How we work
What it is
What does an oven flue job involve?
Each oven outlet is different, so each flue starts with its own adaptor. From there the flue has to cross a hall that is already full of plant and leave through the roof.
In a factory production hall in Derby three ovens needed new flues and the old flue had to come out first. We surveyed the hall and drew the routes in CAD, made three bespoke adaptors, ran three Ø150 twin wall insulated flues at high level on the building steel and took them up through the roof to mesh terminals.
- Site survey and CAD routes
- Strip-out of the existing flue
- Twin wall insulated flues
- Bespoke adaptors to each oven outlet
- Runs at high level off the building steel
- Roof penetrations with mesh or bird beak terminals
- Alterations and extensions to existing flues
- Furnace exhaust surveys and reports
Working factories
Can you work around production?
Yes. Production lines run on shifts and shutdowns are short, so nights and weekends are by arrangement.
The Derby production hall job was planned in three phases with a weekend day allowed for, and took six site days. The last oven was connected after we moved a section of ductwork to make room for its horizontal run.
RAMS are written for the actual job and site, normally the same day, and every job has a Grün project manager on site.
To price it
What we need to price an oven or furnace flue.
Drawings, photos or an outline is enough to start. We price from that or arrange a survey.
- The plant Oven or furnace, what kind, and how many.
- Outlet Size and shape of the outlet on each one.
- Exhaust data Temperature and flow, if you have them.
- Rough route Vertical and horizontal lengths, and what is in the way.
- The roof What it is made of and how high.
- Shutdowns When the line can stop, and for how long.
- Site Town or postcode.
Real jobs
Oven and furnace jobs.
Common questions
Asked on oven and furnace jobs.
Anything else, call 01395 201950, email [email protected] or ask Grün AI.
-
Do you install flues for industrial ovens and furnaces?
Yes. Oven exhausts and process extract, furnace and laboratory flues, AHU and extract connections, and CHP and biomass flues, routed, supported, insulated and tested. -
Can you work in a factory that stays running?
Yes. Production lines run on shifts and shutdowns are short, so nights and weekends are by arrangement. One Derby job was planned in three phases with a weekend day allowed for. -
Can you alter or extend an existing oven flue?
Yes. Our projects include alterations and new flues for two electric box ovens, and a Ø150 oven flue extended about 10 m with two elbows, both on factory sites in Derby. -
Do you survey furnace exhausts?
Yes. For plasma nitriding furnaces at a factory site in Derby we produced survey notes, a site report and a furnace flue analysis that set out how the exhaust could be treated and vented safely. -
How quickly do you send a price?
We normally send a price within 24 hours of getting drawings or survey information. -
What is your lead time?
Normally 2 to 4 weeks from order to install, and faster for urgent jobs. -
Do you do canopies and extract as well?
Yes. Canopies and extract hoods, oven and process canopies, fans, ductwork, supports and plant room ventilation, supplied and installed. See canopies, fans and ductwork.
Send drawings. Get a price.
Send the oven details and the route. A price normally comes back within 24 hours.
Free survey
Want us to come and look?
Free for commercial and industrial projects. We’ll call to confirm the details and the date before anything is booked.