New stainless twin wall riser on cantilever brackets up the brick wall of a plantroom

Projects East of England

Flue and chimney contractors in the East of England

For M&E contractors, main contractors and consultants, anywhere in the UK and Ireland.

Local jobs

Our work in the East of England

25 jobs so far, in Feltwell, Marham, Watford, Dunstable, Cambridge and more. Grouped by service below.

Generator exhausts and silencers

One job. It is on the project map.

About generator exhausts and silencers

Other work

Five jobs. Surveys, repairs, supply only and jobs still being classified. They are on the project map.

Coverage

How we cover the East of England

Our engineers cover the East of England from their base in the Midlands. We normally survey within a week of an order. Head office is in Exmouth, Devon. Every job on this page is one our team has delivered in the East of England, with the site, town and system shown.

What we did

The work, job by job.

  • Barnfield College, Luton: boiler and gas fire flues

    New flues for the plumbing and gas training workshop at Barnfield College in Luton. A row of wall hung boilers connects into one twin wall header that runs along the ceiling and up a riser to the roof. A separate flue serves a gas fire. It is a testing facility, so the boiler flue had to be specially designed: one boiler might run on its own, or all eight at once.

    Case study
  • Glasshouse biomass plant, Wisbech: biomass flue and mast

    We designed a turnkey package: one Ø400 twin wall insulated flue and one free-standing post mast in S355J0 steel, modelled as a free-standing steel chimney. The wind basis (UK zone WZ1, 22.5 m/s) was written into the design and checked.

    Case study
  • RAF Marham B266: boiler flues

    In B266, Ø250 primaries come off each boiler into a Ø400 header, with three elbows and three tees, then out through the wall to an external riser on three cantilever supports. We built floor supports and a strut frame to carry the header inside the boiler house.

    Case study
  • RAF Marham B562: boiler flues

    In B266, Ø250 primaries come off each boiler into a Ø400 header, with three elbows and three tees, then out through the wall to an external riser on three cantilever supports. We built floor supports and a strut frame to carry the header inside the boiler house.

    Case study
  • Biomass plant, Wisbech: biomass flue works

    We designed, supplied and installed additional flue works at a biomass plant in Wisbech. A Ø400 twin wall insulated flue takes the gas from the bag filter to the fan. It runs about 1.5 metres, turns 90 degrees, runs about 3 metres, turns down and drops about 4.4 metres, then turns into the fan inlet.

    Case study
  • Addenbrooke's Hospital energy centre, Cambridge: boiler flue

    Our team delivered the boiler flue at Addenbrooke's Hospital energy centre in Cambridge. In the photograph: stainless boiler flue header with a tee and bends suspended under a steel roof deck.

    Case study

More case studies in this area: B39 RAF Feltwell, Dunstable, Hutchinson Building, Cambridge, RAF Feltwell, Royal Orthopaedic Hospital Watford, St Mary's, Luton.

Send drawings. Get a price.

Got a flue, chimney or exhaust job in the East of England? Send the drawings. A price normally comes back within 24 hours.