Three twin wall boiler flues with steel support frames on the roof

Projects Wales

Flue and chimney contractors in Wales

For M&E contractors, main contractors and consultants, anywhere in the UK and Ireland.

Local jobs

Our work in Wales

16 jobs so far, in Swansea, Rhigos, Dolgellau, Cwmbran, Deeside and more. Grouped by service below.

Generator exhausts and silencers

Two jobs. They are on the project map.

About generator exhausts and silencers

Other work

Two jobs. Surveys, repairs, supply only and jobs still being classified. They are on the project map.

Coverage

How we cover Wales

Our engineers travel to Wales from their base in the Midlands. We normally survey within a week of an order. Head office is in Exmouth, Devon. Every job on this page is one our team has delivered in Wales, with the site, town and system shown.

What we did

The work, job by job.

  • DVLA: boiler flues

    Each flue stands in a cage of 41 x 41 mm galvanised channel. The three cages are tied with rails and bracing so they work as one frame. The frame sits on rubber feet, so there are no roof penetrations.

    Case study
  • Industrial unit, Deeside: boiler flue

    Our team delivered the boiler flue at an industrial unit in Deeside. In the photograph: two boilers in a plant room with stainless flue and pipework rising to the ceiling.

    Case study
  • Rhigos Care Home: boiler and water heater flues

    Flues for two boilers and two water heaters at Rhigos Care Home. We started at the nearest water heater, fitting the tee at the base of the riser and working back.

    Case study
  • St Joseph's RC Primary School, Tredegar: boiler flue

    We designed, supplied and installed the flue for a reboilering project at a primary school in Tredegar. Two new boilers connect into a short twin wall insulated header, laid to a fall with a drain at the end. The flue then rises up the boiler house wall and finishes about 1 metre above the roof.

    Case study
  • Telephone exchange, Llantrisant: generator exhaust

    We designed, supplied and installed a new insulated exhaust flue for the standby generator at a telephone exchange in Llantrisant. We measured the old corroded exhaust during the survey, drew the new route in CAD and fitted it with our own fixings and supports.

    Case study

Send drawings. Get a price.

Got a flue, chimney or exhaust job in Wales? Send the drawings. A price normally comes back within 24 hours.