Generator room with insulated exhausts and silencers in place

Services

Exhaust silencers for generators and engines.

Sized to your noise limit, checked against the engine's back pressure limit, and supplied and installed with the exhaust. Standby generators, CHP and diesel fire pumps.

At a glance

Silencers, in short.

Sized to a limit
Give us the limit in dB(A) and where it applies. We work back from it to the silencer the exhaust needs.
Back pressure
Every silencer is checked against the engine's maximum back pressure before it is chosen.
No limit yet
We size to a grade instead: industrial, semi residential, residential, critical or hospital.
Supports
Silencers on frames we made over the generator sets, or hung from the soffit on rods and channel.
How we work
Supply only, install only, or supply and install, as part of the generator exhaust package.
Price
Normally within 24 hours of getting the engine data and the route.

How we size it

How do you size a generator silencer?

Give us the limit in dB(A) and where it applies: a set distance, the nearest home or the site boundary. We work back from it to the silencer the exhaust needs, then check the silencer's back pressure against the engine's limit.

No limit set yet? We size to a grade instead. Grade names aren't a fixed standard, so the figures below are typical ranges, not promises. What a silencer really takes off depends on its size and the engine, so we check it against your limit on every job.

We don't guess the datasheet figures. If one is missing, we ask.

  • Silencer sizing against a dB(A) limit or a grade
  • Back pressure checked against the engine's limit
  • Silencer and exhaust drawn together in CAD
  • Frames, hangers and supports
  • Flexible connections and flanged joints
  • Pressure test and certificate of conformity

At a glance

Silencer grades and the noise reduction each typically gives.

Industrial
12 to 18 dB(A)
Semi residential
Between industrial and residential
Residential
18 to 25 dB(A)
Critical
25 to 35 dB(A)
Hospital
32 to 42 dB(A)

To price it

What we need to size a silencer.

The engine datasheet and the noise limit are enough to start.

Send what you have
  1. Engine datasheet Exhaust flow, exhaust temperature and the maximum back pressure.
  2. Outlet size The exhaust outlet size on the engine.
  3. Noise limit The limit and where it applies, or the grade.
  4. Distance From the exhaust outlet to that point.

Common questions

Asked about silencers.

Anything else, call 01395 201950, email [email protected] or ask Grün AI.

  • Can you size a silencer to a noise limit?

    Yes. Give us the limit in dB(A) and where it applies, and we work back from it to the silencer the exhaust needs, then check its back pressure against the engine's limit.
  • What if there is no noise limit yet?

    We size to a grade instead: industrial, semi residential, residential, critical or hospital. Grade names aren't a fixed standard, so we give typical ranges, not promises.
  • What do you need to size one?

    The engine datasheet (exhaust flow, exhaust temperature and the maximum back pressure), the exhaust outlet size, the noise limit and where it applies or the grade, and the distance from the exhaust outlet to that point.
  • Do you do supply only?

    Yes. We do supply only, install only, or supply and install.

Send the engine data. Get a price.

The datasheet and the noise limit are enough to start. A price normally comes back within 24 hours.

Free survey

Want us to come and look?

Free for commercial and industrial projects. We’ll call to confirm the details and the date before anything is booked.