Two stainless flue terminals with weathering collars on a block upstand on a tower roof, with scaffold around

Projects · London

Boiler flues and generator exhausts in London

57 jobs in London on our project map: 34 boiler flue jobs, 20 generator exhaust jobs and three other jobs. 29 have a case study with photos.

At a glance

Grün in London

Jobs on the map
57 in London
Kinds of job
34 boiler flue jobs, 20 generator exhaust jobs and three other jobs
Sites include
1 Station Square, Tottenham, King's Cross Plot S5, Stone Studio, Hackney and Walthamstow Academy

What we did

The work, job by job.

  • 1 Station Square, Tottenham: boiler and generator flues

    We designed, supplied and installed the boiler and generator flues at 1 Station Square in Tottenham. Three 280kW boilers connect with Ø200 primaries into a shared Ø550 header, which rises through the building. A separate twin wall insulated exhaust serves a 500kVA standby generator.

    Case study
  • King's Cross Plot S5: generator exhaust

    We designed, supplied and installed the exhaust flue for a basement generator at King's Cross Plot S5 in London. The flue connects to the silencer with a flanged adaptor, rises to ground level, then crosses a corridor wall to the main riser. From there it climbs about 52 metres to the 15th floor and turns out onto the roof.

    Case study
  • Stone Studio, Hackney: boiler flues

    Our team supplied and installed the boiler flue systems for six boilers at a new building in Hackney in late 2020. The flues were designed by others. We surveyed the route to check it against their drawings, then installed the twin wall flue from the basement plant room up to roof level, working from a podium.

    Case study
  • Walthamstow Academy: boiler flues

    We designed an external route. Inside, single wall flue takes a Ø100 connection from each boiler into special Ø250 tees, with one header per bank rising at 3° to the wall. From the wall it is twin wall insulated: through the riser duct, round the building on cantilever brackets and up two risers with base tees and drains.

    Case study
  • 1 Warrington Gardens, Maida Vale: generator exhaust

    Our team supplied and installed a new exhaust flue for the standby generator at 1 Warrington Gardens in Maida Vale, London, in August 2022. Inside, the new flue bolts to the silencer flange and passes out through the block wall. Outside, it turns up the face of the plant room and rises on wall brackets to a terminal with a mesh guard.

    Case study
  • 1-5 Peel Street, Kensington: boiler and water heater flues

    We supplied and installed the flues for two wall hung condensing boilers and a floor standing water heater, built to the customer's own flue design. Each appliance connects with a Ø100 primary into a Ø150 twin wall insulated header. The headers run at high level on strut and drop rods, then out to short external stacks.

    Case study
  • 25 North Colonnade, Canary Wharf, phase 1: generator exhausts

    Phase 1: two Ø200 primaries off the generator outlets into a Ø400 header, then a 12 m stack, all twin wall insulated. Phase 2: a Ø300 and Ø375 twin wall insulated system from a Ø250 outlet, rated for 1,000°C at 5,000 Pa, with offsets to suit the route.

    Case study
  • 25 North Colonnade, Canary Wharf, phase 2: generator exhaust

    Our team delivered the generator exhaust at 25 North Colonnade, Canary Wharf (phase 2). In the photograph: looking up at a stainless generator exhaust stack on the roof.

    Case study

On the map

Every London job.

As named on our project map. Jobs with a case study are linked.

Coverage

How we cover London.

Our engineers travel to London from their base in the Midlands. Head office is in Exmouth, Devon. We normally survey within a week of an order.

The work we have done in London is covered on our boiler flues and generator exhausts and silencers pages. Other jobs in the region are on the London page.

This page counts the 57 jobs with London as their address. The London area page counts 66, because it also takes in Dagenham, Enfield, Harefield and Hayes and other outer towns.

Common questions

Asked about London.

Anything else, call 01395 201950, email [email protected] or ask Grün AI.

  • Do you do commercial flue work in London?

    Yes. Our project map has 57 jobs in London: 34 boiler flue jobs, 20 generator exhaust jobs and three other jobs. Sites include 1 Station Square, Tottenham, King's Cross Plot S5 and Stone Studio, Hackney. We work across the UK and Ireland.
  • What is an example of your work in London?

    1 Station Square, Tottenham. We designed, supplied and installed the boiler and generator flues at 1 Station Square in Tottenham. Read the case study.

Got a job in London?

Send the drawings. A price normally comes back within 24 hours.